Type of UPVC Fittings
UPVC 4 WAY CROSS TEE FITTING
|
Specifications:
The upvc cross tee same as upvc equal tee but the cross tee can slip all the way through 2 adjoining outlets
|
VENT COWL UPVC FITTING
|
Specifications:
uPVC Vent Cowl fitting is to protect the pipe opening from unwanted debris and letting the air from the pipe go out.
|
UPVC FLOOR GULLY TRAP FITTING
|
Specifications:
uPVC floor gully trap fitting is to prevent sewage flowing into property or public pipes
|
END CAP UPVC FITTING
|
Specifications:
UPVC end cap fitting is to dead end the flow of gas or water
|
45 DEGREE WYE TEE FITTING UPVC
|
Specifications:
Wye Tee fitting same as tee fitting but it was 45 degree. Y fitting is allow one pipe to be connect to another at a 45 degree angle.
|
BIG BOSS CONNECTOR UPVC
|
Specifications:
UPVC boss connector is higher flow rate. It was used for soil and waste discharge pipe work for rainwater pipe work within the building structure.
|
UPVC ELBOW 90 INSPECTION OPENING UPVC FITTING
|
Specifications:
The Upvc elbow 90 inspection opening fitting is for plumber need to create a 90 degree bend. The inspection opening fitting has a removable cover that allow the plumber to access to the cable inside.
|
REDUCING BUSH UPVC CONNECTOR
|
Specifications:
The upvc reducer bush aim to regulate the flow of drainage water by phasing water flow from a larger to smaller pipe.
|
SOCKET COUPLING REDUCER UPVC FITTING
|
Specifications:
Reducing socket upvc fitting aim to increase the pressure by reducing surface area of the piping system.
|
SLEEVE FITTING UPVC
|
Specifications:
uPVC sleeve connector is to protect the inner pipe from higher loads and to provide the free movement in a certain direction.
|
90 ELBOW KKK/BBB FITTING UPVC
|
Specifications:
90 degree elbow upvc pipe fitting is used for solvent cement jointing to upvc pipes
|
STRAIGHT SOCKET UPVC FITTING
|
Specifications:
u pvc socket fitting is a connection that joint connectors for pipes.
|
45 ELBOW DEGREE UPVC FITTING
|
Specifications:
45 degree elbow fitting uPVC is to connect pie at 45 pipe angle. It is to produce 45 degree change in the direction of flow of the fluid in the pipe
|
PLAIN P TRAP UPVC FITTING
|
Specifications:
The uPVC P traps aim to hold a small amount of water that prevents sewer gases from rising up
|
